Hopefully will help someone else down the road as well. Note that the changes I made to the settings are meant to be used with the C550, etc., not the C552, but either way, it worked for me. Reboot copier, and all was working perfectly with thick 4.Īttached is a copy of the bulletin I got this information from. Select that and then press switch 1 on the next screen. Inside there you will now find a button titled 'Engine FW DIPSW'. 9 inch colour touch panel with multi-touch support. Paper formats: A6-A3 banner 1.2 metres and custom formats. In any case, in service mode, I changed Software Switch 59 to a hex value of 01, which then adds an option to the Security Screen (accessed by pressing RESET, STOP, 0, CLEAR). The Konica Minolta Bizhub c452 is the next generation of fast printing output and superb image quality, coupled with powerful print/scan control. I'm wondering if perhaps the '2' series has this setting change already done from the factory, and I just 'undid' the change? It was the strangest thing, as the bulletin I found it in states that the solution is supposed to help with jamming problems for transparencies, and the settings were only supposed to apply to the earlier models of these machines (C451, C550, C650). In any case, I did finally find a solution.

I did read about changing the switch 145 setting, and I tried to do that on this copier, but it refused to accept the setting. Change the paper size,emter in the user modeor press the Utility key.I have the Minolta Di 1610 (copier/printer) and every function is OK.One toner cartridge is. Thanks for the reminder though, I forgot to set the loop back after I found the solution, will need to remember to do that. OK, yes, I did try adjusting the loop, with no help.

Bizhub c452 adjust tray